User guide

ProFusion iOPandoraQuickStartGuide 5

1 Connect

If you do not have an existing music player you may skip steps 3 and 4.

1 PleaserefertothecautionaryinformationsheetincludedwithyourProFusion

iOPandorabeforeproceeding.

2 Adjustthevolumeonyouramplifieroramplifiedspeakersdowncompletely.Then

turnoffyouramplifier,oldmusicplayer,and/oramplifiedspeakers.You’llbeprompted

toincreasethevolumelater.

3 Disconnectthepowerandremoveallcablesfromtheoldplayer.

4 Removetheoldmusicplayeranditspowersupply.

5 PlaceyourProfusioniOPandorainanareawithadequateventilationspace.

6 Connectthecablesinthisorder:

A: EthernetcabletoyourplayerandtoyouravailableEthernetport.

B: WhiteRCAcabletoZone1/L,redRCAcabletoZone2/R,andtheotherendtoyour

amplifier.If your old music player used RCA cables to connect to the amplifier, you may

be able to reuse them.

C: Theexternalpoweradaptortoyourplayer.

CAUTION: Certain parts may cause electrical shock and injury.

IMPORTANT:Please note these important operational instructions and

clarications.