Specifications

Confidential Page 7
Edited 09
-
23
-
2010
Shipment Verification - (continued)
In all cases of reported damage, place all damaged freight in a protected area of your
warehouse and guard against further damage or loss.
The DMX Subcontractor is solely responsible for any freight damage or missing
equipment issues that are not reported to DMX within 24 hours of delivery. If
additional equipment needed that was on packing list, contractor will be billed
for that equipment.
All video display products including: projectors, CRT, LCD, Plasma, etc., must have
power and signal applied to verify operation within 48 hours of delivery. Once operation is
verified, the unit is to be returned to its original packing and warehoused until needed.
Operational confirmation of all displays must be reported to the DMX project
manager within 48 hours of delivery. No exceptions.
DMX Inc has entered an agreement with its freight company to insure all video
display devices. The policy, as issued by the insurance company, requires that
all damage and/or device failures be reported within 48 hours. Any damage or
product failures noted after this 48 hour window becomes the sole responsibility
of the receiving party to repair or replace. Receiving party is also subject to all
additional freight expenses that are associated with the damaged or failed
devices.
IMPORTANT NOTE:
The DMX Subcontractor is solely responsible for any freight damage or missing
equipment issues that are not reported to DMX within the given timeframe from
delivery receipt.