Specifications

Confidential Page 39
III. Equipment for Subcontractors
Required:
- True RMS Multimeter
- Real Time Analyzer / SPL Meter
- Tone/Signal Generator (line level and mic level)
- Inductance Wand
- Impedance meter (bridge)
- Telephone butt set / Headphone amp
- Source material for test purposes
- Allen wrenches/bits
- Torx and pin-in torx wrenches/bits
- Thermal Labeler (i.e. Brother P-Touch)
- Phase/Polarity generator and Analyzer
- Soldering iron
- Heat gun
- Punch tool for 66 and 110 blocks
- Staple gun for wire
- Flush cutting dikes
- Coaxial Compression Tool
- Wire stripper
- Jewelers screwdrivers
- Sheet rock saw
Recommended expendables:
- Wire ties 7” and 4” black and white
- Closed end insulated crimp caps
- Spade lug connectors
- Terminal Strips
- Self laminating wire labels
- Staples
- Grommets
- Shrink wrap tubing
- RCA, XLR, and ¼” connectors
- Solder
Recommended service stock:
- Volume controls
- Spare Amplifiers
- 10 K pots
- Microphones
- Various Wire
- Spare loudspeakers (surface and flush)
Edited 09-23-2010