Specifications

Confidential Page 36
Electrical
Make sure the electrician is aware of the following electrical requirements.
If there is a conflict, notify DMX immediately.
• Video and audio power should be 180 deg. out of phase.
• All video equipment to be on same phase including all video displays and all
playback sources.
• If isolated ground is specified, use only iso-ground outlets and strips.
• Twist all ground leads and then cap them.
• Connect all AC outlets using fan out or star method ensuring a direct circuit
connection from the supplying conductor to outlet itself.
• The ground on outlets should always point down.
• When switching AC, the hot leg should be switched, never neutral or
ground.
• If the AC is remotely switched, provide unswitched outlets for any control,
test or technician gear.
Edited 09-23-2010