Installation Instructions

Planning the Job

DMX AG™ Foundation Guide: Version 4.3

Updated: September 9, 2014 (clarifications only denoted by ᵠ)

Overview

This is a quick simplified view of what is involved in installing DMX AG™. The

rest of this guide provides the details

Step 1: Clean the footing and snap a chalk line at the finished grade.

Step 2: Unroll the DMX AG™ (dimples against the wall), with the top

of the membrane slightly below finished grade. (page 6)

Step 3: Install Concrete Nails and Approved Washers or Quick Clips.

(Page 6)

Step 4: Handle corners and overlaps. (pages 8 to 9)

Step 5: Handle windows and service entrances. (pages 11 and 12)

Step 6: Clean up and backfill. (page 16)

DONE!