User manual

If Windows XP is congured
to warn when unsigned
(non-WHQL certied) drivers
are about to be installed,
the following screen will be
displayed.
Click “Continue Anyway”
to continue with the
installation.
If Windows XP is congured
to ignore le signature
warnings, no message will
appear.
The following screen will be
displayed as Windows XP
copies the required driver
les:
Windows should then
display a message indicating
that the installation was
successful. Click “Finish” to
complete the installation.
The serial converter should
now be installed.
The COM port emulation
driver must be installed
after this has completed.
After clicking “Finish” the
Found New Hardware Wizard
will continue by installing the
COM port emulation driver.
The procedure is the same
as that above for installing
the serial converter driver.
63
User Manual vers. 1.4 Appendix 6