User manual
Appendix 3 - Shipping Instructions
If the myograph system needs to be sending back for service or repair, please read
the following shipping instructions very carefully.
Before you start packing the myograph system, please remember that you are dealing
with very delicate equipment and therefore care must be taken. DMT recommends
that each part of the myograph system be wrapped individually (i.e. with bubble
wrap) and placed together in a large box (preferable the box you once received the
myograph system in). Place the wrapped items in the middle of the box and ll out the
surroundings with chips of expanded polystyrene.
Important:
Before closing the box, make sure that no enclosed items can be shaken around as
transport by road or air from time to time can be quite roughly.
Address the box to: DMT A/S
Skejbyparken 152
DK-8200 Aarhus N
Denmark
Make sure that all four sides of the box are marked “fragile” or similar. Make an
indication on the top of the box that it contains goods returned for repair/service.
Customers outside the EC must further enclose a pro forma invoice stating that the
box contains goods being returned for repair or service.
If arranging transportation through a courier, please keep in mind the high value of
the myograph system and that a standard insurance provided by the courier in most
cases is insufcient to cover damage or loss of the myograph system. In most cases
an additional insurance coverage is needed.
59
User Manual vers. 1.4 Appendix 3