User guide

S1 User Handbook
53
7
DEFAULT SETTINGS
DEFAULT SETTINGS
Function Options Channel
1,2,5
Channel 3,4 Channel
6-10
Remote
Input A
See RMA:
Command
Mode for Input 1 Start from
ON & Fader
Up
Start from
ON & Fader
Up
Start from
ON & Fader
Up
Start Operation for
Input 1
Continuous
Start
Continuous
Start
Momentary
Start
Stop Operation for
Input 1
(a GPO must be
congured to use
a Mic Remote Stop
on channels 1-5)
Continuous
Stop
Continuous
Stop
Momentary
Stop
Input 1 Tally Back
(GPI required)
Disabled Disabled Disabled
Input 1 Auto
Tally Back (GPI
required)
Disabled Disabled Disabled
Remote for
Line Input
See RMB:
Command
Mode for Input 2 Start from
ON & Fader
Up
Start from
ON & Fader
Up
Start from
ON & Fader
Up
Start Operation for
Input 2
Momentary
Start
Momentary
Start
Momentary
Start
Stop Operation for
Input 2
Momentary
Stop
Momentary
Stop
Momentary
Stop
Input 2 Tally Back
(GPI required)
Disabled Disabled
Disabled
Input 2 Auto Tally
(GPI required)
Disabled Disabled
Disabled
Control
Room Mute
See MCH:
Command
Enable on Input 1 Enabled Enabled
Disabled
Enable on Input 2 Disabled Disabled
Disabled
Timers
See TMR:
Command
Timer 1 on input 1 Disabled Disabled
Disabled
Timer 1 on input 2 Disabled Disabled
Disabled
Timer 2 on input 1 Disabled Disabled
Disabled
Timer 2 on input 2 Disabled Disabled
Disabled