User's Manual

DIGITAL-LOGIC AG MSM855/HLV/B/B2 Detailed Manual V1.0A
89
J29 LAN Interface Connector
MSM855:
Pin Signal Pin Signal
1 TDN (LAN TX-) 2 TDP (LAN TX+)
3 RDN (LAN RX-) 4 RDP (LAN RX+)
5 LAN-LED Activity 6 3.6V-RTC Lithium Battery Input
7 GND 8 VCC3 (+3.3V)
9 LAN-LED Speed 10 LAN-LED Link
Remarks:
 Pins 1-4 must be connected to a 100/10-BASE-T transformation for isolation.
 Pins 5, 8, 9 and 10 are used to connect 3pc LAN LED’s.
Each LAN-LED-signal must be terminated with a 330 Ohm resistor.
 Pins 6 & 7 are used to connect the RTC-Battery.
MSM855B/B2:
Pin Signal Pin Signal
1 LAN TX- 2 LAN TX+
3 LAN RX- 4 LAN RX+
5 LAN-LED Activity 6 NC
7 GND 8 VCC3 (+3.3V)
9 LAN-LED Speed 10 LAN-LED Link
J30 Sound Interface Connector
Pin Signal Pin Signal
1 CD Input Left 2 GND for CD
3 CD Input Right 4 AUX-Line Input Left
5 GND for AUX 6 AUX-Line Input Right
7 LINE Input Left 8 GND for LINE
9 LINE Input Right 10 GND for MIC1
11 MIC1 Input 12 GND for MIC2
13 MIC2 Input 14 MONO Input
15 Output Suround Left 16 GND
17 Output Suround Right 18 GND
19 Output Front Left 20 GND
21 Output Front Right 22 GND
23 Output Center 24 GND
25 Output Subwoofer 26 GND
27 SPDIF Output 28 Jack-sense 0 (Front-sense)
29 Jack-sense 2 LineIn) 30 Jack-sense 3 (MIC-sense)
J33 LAN Interface Connector
Only on the MSM855B2:
Pin Signal Pin Signal
1 LAN TX- 2 LAN TX+
3 LAN RX- 4 LAN RX+
5 LAN-LED Activity 6 NC
7 GND 8 VCC3 (+3.3V)
9 LAN-LED Speed 10 LAN-LED Link