Operating Manual

31
Digital DMR and
Analog UHF/VHF Two Way Radio
9. TROUBLE SHOOTING GUIDE
Problem Solutions
The radio cannot be switched
on or no display after being
switched on.
Check the power cord connection, make sure the red cord
connect to +, and the black cord connect to -.
Cannot talk to or hear other
members in your group.
1. Make sure the frequency and CTCSS are the same as
other members.
2. Make sure you are within range, and not too far away
from your member
.
3. Make sure you are set in correct digital mode, and
frequency.
4. In digital mode, make sure set correct code and encrypt
group is used in current channel.
5. In digital mode, make sure set correct receiving contacts
and receiving group is used.
Other voices from
non-group members are
heard on the channel
Analog: Change the CTCSS/DCS
Tone, and make sure to change the tone on all radios in
your group.