Operating Manual

Digital DMR and Analog UHF/VHF Two Way Radio

(6)

Upload Beacon

GPS Beacon: The APRS will transmit the GPS data, only if the GPS is set

to on rst, then GPS must also successfully lock on the satellites.

Fixed Beacon: The APRS will transmit the xed beacon data. Someone can transmit the

xed beacon without setting the GPS on. The xed beacon location information should be

set in CPS rstly.

Note: More setup are available by PC software only. CPS-Tools-Options- APRS, you

have to check on the APRS box rst to get APRS menu add to the left Digital menu.

(APRS is a registered trademark of Bob Bruinga, WB4APR)

7.11 Digital Monitor

(1)

DigiMoni Switch

off: Turn off Digital Monitor

Single Slot: Monitor the current TS

Double Slot: Monitor TS1 and TS2

(2)

DigiMoni Cc

Any Cc: Monitor any color code

Same Cc: Monitor the same color code

(3)

DigiMoni Id

Any Id: Monitor any TG

Same Id: Monitor the same TG

(4)

Slot Hold

Off: Turn off the slot hold

On: Turn on the slot hold

Recommend to turn on slot hold when monitor double slot TS1 and TS2, when the signal

is disappear in one slot, instead of switching to the other slot at once, the radio will hold

on some seconds and wait for the audio drop.

7.11.1 Response and Save a call in Digital Monitor Mode

During Digital Monitor, when receive a call with unmatched ID, press [*] key, the screen

will display "Monitor Response Setup Successfully ", press [PTT] key will reponse to the

call.

Press

key, the radio will remind you choose a Zone, you can choose a zone and save

the new channel to the Zone.

7.MAIN MENU FUNCTIONS