Operating Manual

28
Digital DMR and
Analog UHF/VHF Two Way Radio
7.10
APRS Location Reporting(Supported by GPS)
APRS menu is not in menu list when GPS is off, you have to turn on GPS rst if you want
to use APRS menu.
(1)
Upload T
ype
None: No APRS.
Sel A Aprs: Select analog APRS. Sel D Aprs: Select DMR APRS.
(2)
Ana APRS
PTT Upload: Set the PTT
transmit method.
● Off: Not transmit APRS.
● Tx Start: Transmit analog APRS when press the PTT.
● TX End: Transmit analog APRS when release the PTT.
Upload Power: Set the transmit power.
Upload frequency: Set the transmit frequency.
Signal Path: Set the signal path to transmit the APRS.
Upload text: Set the text to be shown on aprs..
(3)
Digi
APRS
PTT Upload: Set the PTT transmit method.
● Off: Not transmit APRS.
● On: Transmit DMR APRS when release the PTT.
Report Channel: Allow user to select a channel to transmit the DMR
APRS, please set the 8 report channels in CPS-APRS-Digi page rst.
Upload Slot: Allow user to select a slot to transmit the DMR APRS.
● Channel Slot: It uses the slot of current channel
● Slot 1: Use slot 1
● Slot 2: Use slot 2
Upload ID: Allow user to set an APRS TG as the destination.
(4)
Digi
APRS Info
The received APRS information will be saved in radio for look back use. Click on "Digi
APRS Info" will show the received APRS information.
Click on "Delete All" will clear the information.
(5)
Intervals Set
This function allows you to set the analog
APRS or DMR APRS auto
transmit at xed times.
above step to check the GPS info, press edit key to Text edit.
b. Press Conrm, and it will display Send or Save. If you select Save, the
GPS info will be saved as a draft message.
c. Choose Send and it will display Contact list or Manual Dial.
d. Select Contact list to choose a contact, press select to send the GPS info. or
e. Select Manual Dial, input the DMR ID, press
key to switch group ID or private ID,
press [MENU] to send the GPS info.
7.MAIN MENU FUNCTIONS