Operating Manual

25
Digital DMR and Analog UHF/VHF Two Way Radio
automatically start ranging function when turned to this channel. The other radio's location
will be showed on screen at intervals.
(21)
GPS Coordinates
Turn on GPS Coordinates, if both radio GPS is positioned, the radio will display the other
radio's distance and position when radio is receiving.
(22)
DMR Mode
Simplex: Enable to communicate by repeater frequencies directly with another radio with
opposite TX/RX frequncies.
Repeater: Enable talk with other radio by repeat frequency throught repeaters.
Double Slot: When TX/RX frequency is same, turn on this function to communicate by the
slot set in simplex mode.
Note: If DMR mode not choosed Doube Slot, the radio will work on Slot in repeat mode. if
choose Double Slot, it is necessary to Double choose a slot by time slot setting.
(23)
Hands Free
This function requires to use the BT earpiece provided by Anytone. When this function is
on, the radio will work in digital duplex mode with connecting the BT earpiece, you can
directly talk without pressing the [PTT] button, it works similar to a mobilephone.
(24)
Tx Interrupt
This feature allows the supervisor to start the transmission while another person is
talking. It allows supervisor to override the ongoing transmission brings other radios hear
what the supervisor is saying, the radio that is transmitting at the time of this override will
not hear the supervisor until he release keys his radio and then he will be able to hear the
rest of the conversation.
(25)
Slot Suit
Turn on Slot suit, the radio will receive calling from both slot, and will be able to call back
in corresponding slot.
※
Chan Set (Avaiable in Analog Channel only)
When the channel type is analog, it will automatically hide the digital menu, The below
listed menus are for analog channel only, unlisted menus are are the same as the digital
channel, please refer to Chan Set (Digital Channel).
(4)
TCDT
Set up the CTCSS/DCS code for the TX.
(5)
RCDT
Set up the CTCSS/DCS code for the RX.
(6)
RTCDT
Set up the CTCSS/DCS code for both TX and RX CTCSS code: 62.5Hz~254.1Hz, a total
of 51 groups DCS code: 000N~7771, a total of 1024 groups.
(7)
Optional Signal
Allows the setup of DTMF/5TONE/2TONE encode and decode for the Analog channels.
(10)
Squelch mode
When the analog channel is set up for both CTCSS/DCS decoding and optional signaling,
you can set up the RX condition in this menu.
7.MAIN MENU FUNCTIONS