Operating Manual

24
Digital DMR and Analog UHF/VHF Two Way Radio
(10)
Name
Allow reset the channel name, this function is only valid in channel mode.
(11)
TX Allow
Always: Always allow transmit
Channel Free: Allow transmit when the channel is free
Different CC: Allow transmit when receive matched signal but different color code.
Same CC: Allow transmit when receive matched signal and same color code.
(12)
TX Prohibit
TX ON: Will allow transmit on the current channel.
TX OFF: Will not allow transmit on the current channel.
(13)
Radio ID
In Digital channel, it will show the DMR ID which must be programmed in the PC software
– Digital – DMR ID list- DMR ID. Allows edit and select an ID for the channel, each
channel allows one ID.
In Analog channel, it will show the radio self ID which is programmed in PC software –
Analog –Analog Address Book – Number.
(14)
Color Code
The digital channel should have the same color code for communication as dened by
the repeater to be used; which can be programmed in the PC software or dened in the
Menu.
(15)
Time Slot
Set up Slot 1 or Slot 2 for the current channel.
(16)
Digi Encrypt
With the digital encryption, the communication will be confidential. A total of 32 digital
encryptions is offered, and it can be programmed in the PC software or dened in the
Menu.
(17)
Encrypt Type
Choose normal encryption or enhanced encryption type.
(18)
RX Group List
It will allow edit the RX Group List and assign a new RX Group List to the channel.
Select Cur List: Select the current RX Group List. Add Group: Add a TG to the current RX
Group List.
Remove Group: Remove a TG from the current RX Group List.
(19)
Work Alone
In the PC software – Public – Alarm settings – Work Alone, you have to set up the
response time, warn time and response method initially.
Turn on the work alone function for the current channel. When the radios predetermined
time has been reached for the alone working time, the radio will beep a sound and show
“Work Alone Predict”. The user has to conrm by pushing the programmed work alone
key to conrm continuing work alone, otherwise, the radio will start its alarm and send the
alarm on the channel when reaching its preset response time
(20)
CH Ranging
In standby, if the call contact type for a channel is "Private call", The radio will
7.MAIN MENU FUNCTIONS