Operating Manual

23
Digital DMR and
Analog UHF/VHF Two Way Radio
(55)
Date T
ime
Time Set: Allows to set up the date and time manually. Use the channel swtich to set the
current year. Move to the month by pushing channel switch. Set the month, and push the
channel switch to move forward each step. Once done, click the Menu key to save the
date and time.
GPS Check: When GPS is positioning successfully, enter this menu, select GPS check to
do the date & time correction automatically.
7.7.2 Chan Set
Channel set menu Route: Main Menu- Settings - Chan Set. The channel set menu
will change accordingly to the channel type. When the channel type is digital, it will
automatical hide the analog menus..
※
Chan Set (Digital Channel)
(1)
New Chan
Allows creat a new channel and save current set up to the new channel.
a. Select "New Chan", then input new channel number and conrm.
b. Input channel name and conrm.
c. Select a zone and conrm.
The new channel will be saved to the selected zone.
(2)
Delete Chan
Allows to delete current channel.
a. Select "Delete Chan",the radio will remind " Delete? "
b. press conrm, the current channel will deleted.
Note:
After delete one channel, the radio will move to next channel.
(3)
Channel T
ype
A-Analog : Set up to analog channel.
D- Digital : Set up to digital channel
A+D TX A: Mixed analog, allow receive analog and digital signal, TX is analog.
D+A TX D: Mixed digital, allow receive analog and digital signal, TX is digital.
(4)
TX Power
Set up the
TX power for current channel.
(5)
Offset
Press [UP]/[DOWN] to adjust of
fset frequency.
(6)
Band W
idth
Only narrow band 12.5KHz for digital channel.
(7)
RX Freq
Input the RX frequency by keypad, click the Menu key to save, press P2 key to return.
(8)
TX Freq
Input the TX frequency by keypad, click the Menu key to save, press [P2] key to return.
(9)
T
alk Around
When the TX radio and RX radio both are set up with Talk Around on, they can
communicate directly without a repeater. The analog channel will use the RX frequency
as TX/RX frequency, the RX CTCSS/DCS decode as TX CTCSS/DCS encode.
7.MAIN MENU FUNCTIONS