Operating Manual

22
Digital DMR and Analog UHF/VHF Two Way Radio
SCM SE: When scanning and stopping for a signal, will terminate the scan. This function
is only valid for a VFO scan.
(24)
Mic Level
Allows to adjust the Microphone gain, level 1 is the lowest, level and 5 is highest gain.
(25)
DTMF Speed
Offers DTMF encode speed which will help the receiver decode successfully, 50~500ms
are the options.
(26)
FM Radio
Turn on or off the FM radio.
(27)
FM Radio Moni
Radio Mon On: When FM radio is used, you can still receive or transmit on the channel.
Radio Mon Off: When FM radio is used, the radio will not permit a transmission or
reception.
(28)
Start Up Pwd
On: Set up the password for start up. You need to input the password to power on the
radio.
Off: No password is required for the radio power on start up.
The password shall be set up in CPS-Optional Setting-Power on-Power-on Password
Char.
(29-30)
AuRepeater A or B (For VFO A or B)
Turn on the Auto Repeater function, the TX frequency in VFO mode will auto increase or
reduce frequency base on the set up offset frequency in CPS.
Off: Turn off the function.
Positive: TX frequency= RX frequency + Offset frequency.
Negative: TX frequency= RX frequency - Offset frequency.
(31-50)
Key P1-P6,PA-PD
You can program these keys for different functions.(Refer to page 10 & 11)
(51)
Weather Alarm
(52)
Relay station
Turn on the cross band repeater function. The radio will work as a repeater,the radio will
TX on one channel, RX on the other channel.
Cross band Analog - Analog : Must be UHF-VHF, or VHF-UHF cross bands.
Cross band Analog - Digital : Must be UHF-VHF, or VHF-UHF cross bands.
Cross band Digital - Digital : UHF-VHF, or VHF-UHF cross bands, different time slot
Same band Digital - Digital : Same UHF or same VHF bands, different time slot
Same frequency Digital-Digital: TX and RX are at same frequencies, but different time
slot.
(53)
SMS Format
M-SMS: Allows SMS text communication with Motorola DMR radio. H-SMS: Allows SMS
text communication with Hytera DMR radio.
(54)
Time Zone
Set up the time zone of your location.
7.MAIN MENU FUNCTIONS