Operating Manual

21
Digital DMR and Analog UHF/VHF Two Way Radio
(11)
Language
Choose the Chinese or English.
(12)
Menu Exit Time
5S-60S: When enter the menu, the radio will stay at the menu in the set time. When the
time is reached, the radio will auto exit the menu.
(13)
Start Display
Picture: The radio will display an AnyTone picture when powered on.
Character: The radio will display the characters set up in PC software when powered on.
Customer's Pic: The radio will display the picture uploaded by PC software. In CPS -Tool
-Boot Image, it will allow you upload a Power-on Picture.
(14)
Background
Defualt Picture: In standby, the radio will display default picture.
Customer's Pic: The radio will display the picture uploaded by PC software. In CPS-Tool-
Standby BK Picture, it will allow you upload a standby background picture.
(15)
ChanFont Color
White: In standby, the channel and other information will display color in white.
Black: In standby, the channel and other information will display color in black.
(16)
Main Ch
Channel A: The upper displayed channel will be set to become the main channel.
Channel B: The lower displayed channel will be set to become the main channel.
(17)
Sub Ch Off
Sub Channel On: Turns on the sub channel, and the radio will display both channel.
Sub Channel Off: Turns off the sub channel, and the radio will display the main channel
only
(18)
SMS Prompt
Different prompt options when receive a new message.
(19)
Call Ring
Different prompt options when receive a new call.
(20)
Freq Step
2.5K,5K,6.25K,10K,12.5K,20K,25K,30K,50K, total of 9 frequency steps.
(21)
Ana SQ Level
Adjusts the squelch level to receive signal with different signal strength, and a total of 5
levels offered. This function is only valid for analog channel.
(22)
TBST Sel
TBST frequency is used to activate some dormant repeaters, 1000Hz, 1450Hz,1750Hz,
2100Hz a total of 4 options are offered.
Press PTT and PF1 key together to transmit the TBST tone.
(23)
Scan Mod
SCM TO: When scanning and stopping for a signal, stays at the channel 5s before
resuming the scan.
SCM CO: When scanning and stopping for signal, stays at the channel until the signal
disappears, and resumes scan 2s later.
7.MAIN MENU FUNCTIONS