Operating Manual

20
Digital DMR and Analog UHF/VHF Two Way Radio
for a short time. This function allows to set the stay time on the repeater.
7.7 Settings
7.7.1 Radio Set
(1)
Beep
Beep On: The radio will beep when you press the keypad
Beep Off: No beep when you press the keypad.
(2)
Speaker Mode
Mic Spk: Allows the voice come out from the speaker on microphone.
Radio Spk: Allows the voice come out from the speaker on radio.
Both: Allows the voice come out from both speakers on microphone and on radio.
(3)
Mic Spk Set
When you allows the voice come out from the speaker on microphone, you have to set it
is for A channel or B channel.
A channel: Only the voice from A channel will come out.
B channel: Only the voice from B channel will come out
(4)
Back Light
LCD backlight intensity is adjustable in 5 steps
(5)
Ch. Name
CH name: The radio will work in channel mode and display the channel name, and then
the programmed VFO/ MR key is not valid.
Frequency: The radio will work in VFO mode and display the frequency, which allows the
programmed VFO/MR key to switch the VFO and Memory channels.
(6)
Key Lock
Manual Lock: Long press the [
*
] key to lock the keypad. Press [MENU] key, then press
the [*] key to unlock the keypad.
Auto Lock: Radio will auto lock the keypad when standby for a while. Press [MENU] key,
then press the [
*
] key to unlock the keypad
(7)
Auto Power Off
Allow to set automatic power off when not used for a period of 10 minutes, 30minutes, 1
hour or 2 hours of inoperation.
Off: Turn off the function
(8)
TX Timer
30S-240S: The TX will be limited in the set time. When this time is reached, the radio will
auto stop transmission.
OFF: Turn off the TX time limit, and there is no limit for the transmission time.
(9)
Max Vol Level
Indoor: Very low volume, suitable for the indoor use.
Level 1-8: Set up the maximum volume level.
(10)
Enhanced Sound
It will allow you set up the microphone audio pitch.
Normal: Low pitch.
Enhance: High pitch.
7.MAIN MENU FUNCTIONS