Operating Manual

19
Digital DMR and Analog UHF/VHF Two Way Radio
7.5.2 Scan List
Allows create a new scan list or edit the existing scan list.
7.6 Roaming
Roaming fucntion enable users to search the roaming channel list by a programmed time
interval and lock on the repeater with strongest signal.This function is only valid for digital
channels.
(1)
One Time Roam
Allow you turn on the roaming manually. After the roaming is nished, it will
return to the off state. ** Manually Roaming is a onetime action only.
(2)
Roaming Zone
Select Roam Zone: select a Roaming Zone from the list to set it as active zone. You can
also scroll down the list of Zones and select Add Channel to add a new channel to the
current Roaming Zone and set the parameters.
Select Add Channel: Add a new roaming channel to the current zone.
New Roam Ch: Allows you modify the RX frequency/TX frequency/CC/ TS/CH name for
the roaming channel. Also allow you remove the roaming channel from the zone.
Edit Name: Edit the zone name.
Select Zone: Select the roaming zone for current channel.
Delete Zone: Delete the roaming zone from the current channel.
(3)
Auto Roaming settings
Set the xed time waiting interval to begin automatic roaming when the repeater cannot
be found, roaming will begin at the end of this time.
On/Off: Turn on or turn off the auto roaming function.
Fixed Time Set: The roaming will be started at preset xed time or set to off.
Start Roaming:
Fixed Time: Starts timed roaming
Repeater check: The roaming will be started when the radio cannot find a repeater -
"The repeater is out of range" icon will appear, then the radio will perform roaming one
time, and return to roaming off automatically.
(4)
Repeater Check
On/Off: Turn on this function will allow the radio to check the repeater status.
Interval Set: When the repeater is out of range, the radio will try reconnect to the
repeater, this function allows to set the interval for reconnections.
Reconnections: when the repeater is out of range, the radio will try reconnect to the
repeater. This function allows to set the reconnection times.
(5)
OutRange Note
When the repeater is out of range after the repeater check, the radio will remind out of
range.
Note kind: It allows to set beep or sound to remind out of range.
Note Times: It allows to set the “out of range” display times on screen.
(6)
Effect wait
During roaming, when the radio nds a repeater within range, it will stay at the repeater
7.MAIN MENU FUNCTIONS