Operating Manual

17
Digital DMR and
Analog UHF/VHF Two Way Radio
6.
A
DV
ANCED
FEA
TURES
FOR PRIV
ATE
CALL
6.1
Access Advanced Features for Private Call
Method 1:
To Access a Private Call from Contact list
a.
Press the [MENU] key to enter the
Talk Group, select a private call ID.
b.
Press Option to access the advanced features.
6.2 Set Up
Advanced Features for Private Call
(1)
Call Alert
Select Call
Alert, it will send out a call alert, the target radio will sound a beep or vibrate
when receiving the call alert, and it will return a success call or failed call message to the
transmit radio.
(2)
Remote Monitor
Select Remote Monitor
, and it will send out a signal for the target radio will turn on its
microphone and transmit when receiving the signaling, it will send back the voice to the
transmit radio. With this feature you can monitor the sound activity near the target radio
remotely.
**You have to check on the function in CPS-Optional Setting-Digital Func- Remote
Monitor rst.
(3)
Get GPS info
Select
Get GPS info, and it will send out a signal to the target radio which will start the
GPS positioning and send a message of its GPS position to the transmit radio.
**You have to check on the function in CPS-Optional Setting-GPS/Ranging- Get GPS
positioning rst.
(4)
Check Radio
Select Check Radio, and it will send out a radio check to the target radio which will send
back a message if it is available
or not available to the transmit radio. With this feature,
you can determine if another radio is active and powered on in the system.
(5)
Kill
Select Kill, and it will send out a kill signaling to the target radio which will be killed (No
display, no operation) when receiving the signaling and it will send back a kill successful
message to the transmit radio.
**You have to check on the function in CPS-Optional Setting-Digital Func- Digital Remote
Stun&Kill rst.
(6)
W
ake
Select Wake, and it will send out a wake signaling to the killed radio and the target radio
will return to standby when it receives this signaling and send back a Wake successful
message to the transmit radio.
**You have to check on the function in CPS-Optional Setting-Digital Func- Digital Remote
Stun&Kill rst.
(7)
Ranging
When caller and receiver
both GPS positioned, if the caller turn on ranging function and
the receiver is within communication range, Tx radio will detect the distance and direction
between two radios at xed interval, and then show the information on the display of Tx
radio.
Method 2: Access from Manual Dial
a.
Press the [MENU] key to enter theT
alk Group, select Manual Dial.
b.
Input the Private ID, press Option to access the advanced features.