Operating Manual

Digital DMR and

Analog UHF/VHF Two Way Radio

When in analog

mode, if no signal, it will emit noise when press the Monitor Key.

** The Rx icon is seen when monitor is activated.

5.1

1 Monitor

n standby, press the programmed [Monitor] key to enter Monitor. When receiving

matched carrier but the signaling / ID is unmatched or the signal is too weak, this function

allows monitor the weak signal and signal with unmatched ID. Press the key again to shut

off speaker and return to standby.

5.12 Emergency Alarm

Press the program

med [Emergency Alarm] key to turn on alarm function, then press this

key again to return.

5. BASIC OPERA

TIONS