Operating Manual
15
Digital DMR and
Analog UHF/VHF Two Way Radio
5.7 New channel
(1)
Enter radio Menu-Settings-Chan Set-New Chan.
(2)
Input the channel number and name.
(3)
Select
a zone from zone list, then Conrm To Save. The radio will start channel saving,
and saving is completed when it displays "Saved".
(4)
Now select the new
channel in the radio and go to Channel Settings menu to set up all
the new channel's parameters.
»
The temporary call will be droped when the digital hold time is expired and the radio
will return to the preset TG/DMR ID in channel.
5.8 Delete Channel
Enter radio Menu-Settings-Chan Set-Delete Chan, it allows to delete the current channel.
5.9 Receiving and Responding to a Radio Call
When the
radio is in the digital mode, it can receive and respond to a call with the same
frequency/color code/ slot. When receiving a call:
a.
If th
e radio is programed with callers DMR ID number in the digital contact list, when
receiving a call, the radio will ring or vibrate briey.
b.
The blue LED lights up.
c. The left top corner of LCD shows the RSSI icon, and the LCD display will show DMR
ID/name/city/state/country/call type and incoming icon based on what is in the contact
list.
d. When the call is ended, it will displa
y “Call end”, and you can press [PTT] to respond
the call. Make sure to respond the call within the digital hold time, otherwise the radio
will drop the connection after the digital hold time is expired.
5.10 Make a Digital Call
A. T
alk to the preset TG/DMR ID in channel
Choose a programmed channel and press PTT to start the call.
B. Talk to a temporary TG/DMR ID not in the channel
Method 1: Select a temporary TG/DMR ID from the Talk Group list.
(1)
Choose a programmed channel.
(2)
Press [EXIT]
key to enter the TG List, turn the channel switch or press the UP/DN key
on microphone to choose a TG/DMR ID.
Method 2: Select a temporary TG/DMR ID from the keypad.
(1)
Choose a programmed channel.
(2)
Press [Menu] key to
Talk Group, select Manual Dial.
(
3)
Input
the ID number by keypad on microphone, press [#] key to switch group ID or
Private DMR ID.
Press the [PTT] key to start the call, the red LED lights up, the receiver ID/name/city/
state/country/call type and call out icon will be display on the LCD. Release [PTT] key to
receive the reply.
5. BASIC OPERA
TIONS