User guide

ManualsBrandsDMP Electronics ManualsComputer equipmentXTL Series

Cut along dotted lines.

Text For this action

OFF (Output name or #) TurnstheOutputspeciedtoOFF

MOMENTARY (Output name or #)

TurnstheOutputspeciedtoMOMENTARY

Z-WAVE HELP List of Z-Wave compatible text commands

STAUS LIGHTS

To receive a status update for all light devices

TURN ON (Light name) TurnsthespeciedlighttoON

TURN ON (Light name) (Dimmer level) Turnsdimmerlightontoaspecictemp

TURN OFF (Light name) TurnsthespeciedlighttoOFF

STATUS LOCKS

To receive a status update for all lock devices

LOCK (Lock name) Locksthespecieddoorlock

UNLOCK (Lock name) Unlocksthespecieddoorlock

STATUS THERMOSTAT

To receive a status update for the thermostat

SET (thermometer name) COOL (Temp) SetthermostattoCoolwithspecictemp

SET (thermometer name) HEAT (Temp) SetthermostattoHeatwithspecictemp

SET (therm name) AUTO (Hi & Lo Temp) SetthermostattoAutowithspecictemps

ACTIVATE (Favorite name) Activate the devices in the Favorite

Z-Wave Device Names:

Device # Z-Wave Device Name

1. Call the panel phone number. The panel answers and sounds one

short tone.

2. Enter your code within eight seconds. One beep means the code is

good. Four short beeps means enter it again. You have three tries.

3. Youhave 30seconds toenter therstcommand (seeother side)

and 30 seconds for each additional command.

If You will hear

All areas are armed 3 short beeps

Area 1 (Perimeter) is armed 1 short beep

Any area is armed 2 short beeps

All areas are disarmed 1 long beep