User guide

38 XTL Series User Guide Appendix A
Appendix A
Zone Activity Check Event Display
This displays the date and time the Zone Activity Check was enabled
or disabled.
Description
MSG 5:18P 10/17
ACT DISABLED
The Zone Activity Check was
disabled at 5:18 PM on October 17.
Activity Check Event Types - There are three event types:
ACT DISABLED ACT ENABLED NO ZONE ACTIVITY
Zone Bypass Event Displays
This displays the system zones bypassed.
Description
BYP 5:18P 10/17
EAST WINDOW
The east window zone was
bypassed. Press any Select key for
the zone number and user number.
Bypass Event Types - There are three event types:
BYP - Bypass RST - Restore FRC - Force Arm
Note: You may sometimes see the user as SWG. This is short for
Swinger Bypass which is an automatic function that allows the
system to bypass a zone.
About the Display Events Section
User Code Level: Master or Standard.
While in the Display Events function, use the COMMAND and Back
Arrow keys to move forward or backward through the list of events.
To view more information about each display, press the Select key
as directed in the explanations below.
Using the Display Events Function
1. Access the User Menu.
2. Press the COMMAND key until DISPLAY EVENTS? displays.
Press any Select key.
3. The keypad displays FIRST LAST.
Select FIRST to view events starting from the oldest to the
newest. If you select FIRST, use the COMMAND key to scroll
up through the events displays.
Select LAST to view events starting from the newest to the
oldest. If you select LAST, use the Back Arrow key to scroll
down through the event displays.
Display Events allows you to view up to 100 past events that
occurred on your system from any keypad. Any event older than 45
days automatically clears from the system memory. Once the full
100 events are reached, any new event received clears the oldest
event from the list.