User guide

28 XTL Series User Guide User Menu
User Code Level: Master or Standard.
Function: System Test is used to test the battery, alarm siren, and
central station communi cation. The System Test function begins
automatically as soon as you select it.
Using the System Test Function
1. Access the User Menu.
2. Press the COMMAND key until SYSTEM TEST? displays.
3. Press any Select key. The system test begins automatically
and the keypad displays:
1) SIREN SOUNDING during a two second siren test, then:
2) KEYPAD SOUNDING during a two second keypad test,
then:
3) BATTERY - OKAY or BATTERY - TRBL to indicate the
battery condition, then:
4) TRANSMIT TEST * and ATTEMPT NO : 1 during the
transmit test, then:
5) TRANSMIT OKAY or TRANSMIT FAILED to show the
transmit test results, then:
6) TEST END to indicate the System Test is complete.
7) Press the Back Arrow key to end the system test.
* The transmit test does not occur on local systems.
Testing your system burglary protection: The System Test function
should be part of your weekly testing and should be followed by
placing the interior and perimeter burglary devices in Zone Monitor
mode. This allows you to open and then close each protected door
andwindowwhilelisteningforthekeypadtobeepconrmingits
operation. See Zone Monitor.
User Codes
User Code Level: Master only.
Function: Allows you to add or delete a user from the system or
change their user code or authority level.
User code characteristics: There are three characteristics
associatedwitheachusercodethatdeneits capabilitieswithin
the system.
Characteristic Example
User Number 22
User Code 3848
User Name John Smith
Authority Level Master
User Number - The XTL Series panel supports 30 users. Each user is
numberedfrom1to30.Thisnumberidentiesthemtothesystem
and can be transmitted to the central station (if your system is
monitored) when they arm or disarm the system.
User Code - Users also have a 4-digit user code they enter into the
keypad when arming or disarming. This user code is kept secret
from other users and is not transmitted to the central station when
they arm or disarm.
Note: A User Code cannot begin with zero and cannot be left
blank.
User Names - Each code may also be programmed with the user
name. You may enter up to 16 characters for the name. As needed,
refer to Appendix C for Entering User Names information.
Authority Level - The user is also assigned a level of authority
(Master or Standard) by the person administrating the system to
determine the functions the user can access.
System Test