User Guide

Digital Monitoring Products XR500 Series Canadian Programming Guide
54
zone informaTion
19.11.7
BUTTON ACTION
yyy: XXXXXXXX
Button Action
ThisoptionspeciestheButtonActionforanindividualkeyfobbutton.The
default action for the button selected is displayed. Press any Select key to
displaytheButtonActionoptions.ToviewmoreoptionspressCOMMAND.
yyy=thenameofthebuttonbeingprogrammed(TOP,BTM,LFT,RGT).
BUTTON ACTION
ARM DIS TGL STA
ARM (Arm) - Arms selected areas and force arms bad zones.
DIS (Disarm) - Disarms selected areas.
TGL (Toggle Arm) - Togglesarm/disarmforselectedareasandforcearmsbad
zones when arming.
STA (Status) - CausesthekeyfobLEDtoindicatethearm/disarmstatusofthe
system.
BUTTON ACTION
PN PN2 EM EM2
PN (Panic) - Triggers a Panic zone type alarm with no restoral.
PN2 (Panic 2) - Triggers a Panic zone type alarm with no restoral when pressed
simultaneously with any other Panic 2 button. No action occurs when pressed
alone.
EM (Emerg) - Triggers an Emergency zone type alarm with no restoral.
EM2 (Emerg 2) - Triggers an Emergency zone type alarm with no restoral when
pressed simultaneously with any other Emergency 2 button. No action occurs
when pressed alone.
BUTTON ACTION
OUT RST UN
OUT (Output) - Causes an output to turn on steady, pulse, momentary, toggle or
off.
RST (Sensor Reset) - Causes the panel to perform a standard Sensor Reset.
UN (Unused) - The button is not used and performs no action.
19.11.8
BUTTON
PRESS TIME: XXXXX
Button Press Time
Thisoptionspeciestheamountoftime(SHORTorLONG)theusermustpress
the button before the key fob sends a message to the wireless receiver. The
default press time displays. Press any Select key to set the Button Press Time
forArm,Disarm,Toggle,Status,Output,andSensorReset.
Note:TheButtonPressTimeisnotprogrammableonPanic(PNorPN2),
Emergency(EMorEM2)orUnused(UN)zones.Forthosezonesthebuttonpress
timeisalwaystwo(2)seconds.
PRESS TIME:
SHORT LONG
SHORT - Pressthebuttonforone-half(1/2)secondtosendthemessagetothe
wireless receiver.
LONG - Pressthebuttonfortwo(2)secondstosendthemessagetothewireless
receiver.
19.11.9
ARM/DIS AREAS:
Arm/Disarm Area Selection
InanAreasystemorHome/Sleep/AwaywithGuestsystem,thisspeciesthe
areastobearmed/disarmedbytheKeyFobbuttonbeingprogrammed.To
select an area between 1 and 32, enter the area number using the keypad digit
keys. Default is no areas enabled.
Inordertoarmordisarmselectedareas,theProleassignedtotheUser
Number needs to have the same area numbers selected. Any area may be
selectedatArm/DisarmAreasbutonlymatchingareanumbersarearmedor
disarmedwhenthespecicbuttonispressed.Forexample,inAreasselection,
areas1,3,and7areselected.IntheUserProleArmandDisarmAreas,areas
1,2,4,and7areselected.WhentheuserpressesthebuttontoArmorDisarm
area(s),onlymatchingareas1and7Arm/Disarm.
Note:WhenmoreareasareselectedatArm/DisarmAreasthanareauthorized
intheUserProle,inthefuturetheusercanbegivenaccessauthorityto
additionalareasthroughtheUserProlewithoutrequiringadditionalpanel
programmingtoselectArm/DisarmAreas.SeeUserProlesintheAppendixor
refertotheXR500SeriesCanadianUser’sGuide(LT-0683CAN).