Specifications

© 2015 Digital Monitoring Products
If you want to create a new account by using an existing account file as a template, open the Panel
Information window by selecting File > Panel Information. Select the account file that you wish to
use as a template by clicking on that account in the list. Then click on the Copy button at the bottom
of the window to open the Copy Panel window.
Source: This field shows the account name and number that you are using as a template.
Model: Select the model number of the panel from the drop-down menu.
Version: Enter the firmware version of the panel.
Receiver: Leave the Receiver field set to 1 unless you have multiple receivers.
Account: Enter the account number that you wish to assign to the new account. Take note of the
account number guidelines discussed in Account Number Conventions.
Template: Select this to create a template to be added into the Template tab. Enter a name for the
template. The template can then be used to compare panel programming against existing panels.
When you have filled in all of the fields in the Copy Panel window, click OK to go back to the Panel
Information window. Fill in the fields of the Panel Information window according to the directions in
Setting Up New Alarm Accounts.
The Template tab under Panel Information can be used to create and manage templates of panel
programming and to use for comparison against existing programming of panel accounts.