Specifications

A checkbox labeled Programming On File allows

you to specify whether or not the panel's

programming is kept on file. If you wish to

maintain the panel's programming in Remote Link,

leave the box checked. If you wish to assign the

new panel to a main account and use the main

account's programming as the new panel's

programming, uncheck the box by clicking in the

box. Programming On File is checked as default.

See Programming Not on File for more

information.

When you click on the drop-down arrow in the

Model field, Remote Link displays a list of the

panel models. Select the appropriate panel model

number. For XR550 with Encryption, XR500E, or

XR2500F panels, select the XR550 with Network or

XR500N panel and check the appropriate panel

type under Feature Set.

In the Version field just below Model, enter the

firmware version of your panel.

Feature Set: When you select a panel, the Feature Set displays the available features and panel

types. Check the enabled features of the panel for the account you are creating.

Click on Encryption when an XR550 with Encryption

or XR500E panel is installed. The encryption

feature allows the panel to send and receive data

using AES encryption. To complete encryption

programming, enter a Passphrase in Network

Options.

Click on XR2500F when an XR2500F Addressable

Fire Alarm Control Panel (FACP) is installed.

Click on SVC USER AUTH to enable the option to

authenticate service personnel before allowing

access to panel programming or the User Menu.

Leave the Receiver field set to 1 unless you have

multiple receivers.

In the Account field, enter the account number

you wish to assign to this subscriber account. Only

numbers may be used for account numbers: Do not

use letters when assigning account numbers.

When assigning account numbers, follow the

conventions described in Account Number

Conventions. See below for information about

iCOMsl account numbers.

When you are finished completing all of the fields in the New Panel window click OK to close that

window and return to the Panel Information window.