Specifications

© 2015 Digital Monitoring Products
privileges.
The remainder of this document will assume a ‘typical’ organizational structure and Link
configuration. This is defined as:
There are one or more Workstation Administrators who perform maintenance of the
workstations. Workstation Administrators only interact with Link for installation, maintenance
and decommission.
There is at least one Link Administrator who performs operator management tasks within Link.
The Link Administrator interacts with Link on an as-needed basis.
There are one or more Link Operators who use Link on a daily basis. Link Operators cannot
perform Link installation, maintenance or management tasks.
Installing
A Workstation Administrator must perform installation of Remote Link, System Link or Link Server. A
Workstation Administrator must also perform any version upgrades to Remote Link and Link
Server. Any Link modules (e.g. Account Groups) should be activated at the time of installation by the
Workstation Administrator. See Registering and Activating Modules section of Link Help.
Registry Keys
Once Remote Link and all modules are installed, the Workstation Administrator should give Link
Administrators Full Control access to modify the DMP key shown and its sub-keys.
A Link Operator does not require any additional registry privileges.
The primary registry key that Link uses to store application data is:
\HKEY_LOCAL_MACHINE\SOFTWARE\Digital Monitoring Products\