Specifications

To add a new receiver, click New, and enter the Version number, Receiver number, and Account

number for the receiver and click OK. The account number is needed to maintain database integrity

and is not used by the system. Any number that is not used by a panel is fine.

Receiver Name: Enter a name for the receiver. The receiver name can be 32-characters long.

COM Port: Select the COM port used for connecting to the receiver. Be sure to select a setting

that does not interfere with a mouse, modem, or any other device on the computer. The

programmed COM port cannot be used for any other purpose while Remote Link is running.

If a COM Port is programmed for a receiver, Remote Link verifies that a good connection

exists before opening the receiver for editing. If no receiver is connected, an error message is

displayed. To edit a receiver without testing the connection, set COM Port to None.

To copy an existing receiver, select the receiver from the list and click the Copy button. A new

window appears, allowing changes to be made to the information. Once the new information has been

added, click OK.

To delete a receiver, select the corresponding receiver from the list and click the Delete button.

To program a receiver, select the corresponding receiver from the list and click the OK button.

To filter accounts, select the Panel Filter button. This allows filtering of panel or user information.

This option is not available if using the SQL Server module.