Specifications

File > Panel Information

In the Location section of the Panel Information window, enter the address where the panel is

located. Also enter a voice phone number for the panel location, and a night phone number where you

may speak to someone about the panel after business hours.

Extra Information: You may record additional notes about the panel account by clicking on the Extra

Information button. Clicking the Extra Information button opens the Extended Panel Information

window.

File > Panel Information > Extended Panel Information

Click the Extra Information button if the Panel Information window to open the Extended Panel

Information window.

There are several fields in the Extended Panel Information window:

Response: Enter any information for the operator on what type of response to send in case of an

alarm on this panel.

Notes: Enter any additional information, such as special details about the building and premises

that may be useful for the operator or response team.

Emergency Call List: Enter the name, address, and phone number for the individuals to contact

in case of an alarm on this panel account.

Auto Recall Frequency: Enter the number of days (0 to 60) during which the panel is expected to

send at least one Automatic Recall Test. By default this field is blank. When the field is blank or

0 (zero)is entered, Remote Link will not look for an Automatic Recall Test for the account.

If Remote Link does not receive an Automatic Recall Test within that period, the account is

placed in the Recall Failure List. You may print the list of accounts that failed to send an

Automatic Recall Test by going to File > Print > Recall Failure List.

After an Automatic Recall Test is received, Remote Link begins counting down to look for the

next Automatic Recall Test from the account. Remote Link's countdown adds two hours onto the

entered number of days. For example, if 2 is entered in the Auto Recall Frequency field, Remote

Link will look for the next test in 50 hours-48 hours plus two.

Allow Test Deferrals: Check this box to allow Remote Link to accept any incoming message from

the account as the Automatic Recall Test. For example, if 2 is entered in the Auto Recall