Specifications

COM Port: Select the computer's communication port that is connected to your panel. This field will

only appear when you select Direct in the Type field.

Baud Rate: Set the Baud Rate to 9600. The only time you may want to select a slower baud rate is if

you are using a direct cable connection and you are having communication problems. The setting on

the 462N card must match this entry. This field will appear only when you select Direct in the Type

field.

Phone Number: Enter the Mobile ID Number that you received when the SIM/MEID card was

activated.

File > Panel Information

Backup Communication Info rm ation

A Backup Communication type is available and may be programmed as one of the following:

Type: From the Type menu select which type of Backup Connection will be used to communicate with

the panel:

None: Select this option if no backup communication is desired.

SCS-1 / SCS-105: Select this option to communicate with the panel through an SCS-1, SCS-1R or

SCS-105 Receiver using a dial-up connection.

Phone: Enter the panel phone number. This field will only appear when you select SCS-1 /

SCS-105 or Modem in the Type field.

Note: If you need to dial a number to access an outside line, enter that number before

the panel's phone number. Also enter a P for a pause after dialing the number to access the

outside line. For example, if you need to dial 9 to get an outside line, enter 9P then the