Specifications

button to add a separator to group common menu options, such as Panel Information and Connect.

If you would like to remove a menu option from the toolbar, select the option from the Toolbar list

and press the Remove button.

Displaying the Toolbar

After you have placed the menu options in the Toolbar list, you may customize how you would like the

toolbar to display. Check the Show Toolbar box to display the toolbar. You may show an image of the

menu option by checking the Show Images box.

Select Show Caption to display the menu option name. If you show the images and the caption, you

can select where you want the caption to display. To display the caption below the images, check the

Show Caption Below Image box. If you do not check the Show Caption Below Image box, the caption

will display to the right of the image.

System > Rem ote U pdate

The iCOMsl, the NRL-101, the ePAD version 200 or higher, the iCOM version 102 or higher, the iCOM-

E, XR2500F, XR500 Series, XR100 Series, and XR150/XR350/XR550 Series, have the ability to accept

software updates from a remote location using Remote Link. Performing a remote software update

(flash update) allows you to quickly and conveniently update the software without making a trip to the

site.

The software updates will be posted to the Dealer Direct section of the DMP Web site at

www.dmp.com. Follow the directions on the web site to download the update to your computer's hard

drive.

Note: Be sure to save the update in a location on your computer hard drive you will remember.

Creating an Account for the Device to be Updated

To perform a remote update, you must first create an account for that device if one does not already

exist. For example, to update an ePAD, create an account in the Panel Information window by clicking

the New button. Select ePAD from the Model drop-down list in the New Panel window. Then enter the

ePAD's IP Address and IP Port in the Connection Information window.

The IP Port must be the same as the Upgrade Port programmed in the ePAD. When performing a

Remote Update on an iCOM/iCOM-E or NRL-101, the IP Port must be the same as the Telnet Port

programmed in the iCOM/iCOM-E or NRL-101. When programming an iCOMsl, the IP Port must be the

same as the Programming Port programmed in the iCOMsl.

Note: If the network device being updated is behind a router, you must open a port for the

remote update. Refer above for the default values for the port. Be sure that the proper port is

opened in the router that corresponds with the port programmed in Remote Link and in the

iCOMsl, NRL-101, ePAD, or iCOM/iCOM-E.

Performing the Update

To perform a remote update, select System > Remote Update from the drop-down menu. In the

Remote Update window, use the browse button to find the software update file on your computer's

hard drive. Remote Link will automatically search the database for the devices for which the software

update applies and will display those devices in the Panels to Update portion of the window. For

example, if the update is for the ePAD, all ePAD panels will be displayed.

In the Devices to Update portion of the window, check the box next to the devices you wish to

update. You may click All to select all devices and Clear to clear all devices.