Specifications

© 2015 Digital Monitoring Products
System > Operato r Configuration > Receiver
Each option refers to an SCS-150 programming window. Check each box to assign the operator
authority to perform receiver programming options. You may click the All button to select all options
on the Receiver Programming Tab. Click the Clear button to remove all options.
System > Toolbar Configuration
Remote Link provides a customizable toolbar to assist you when performing common tasks. The
toolbar is displayed just below the menu bar.
By placing a button on the toolbar, you can quickly open the needed window without using the menu
bar and drop-down menus. For example, if you frequently arm and disarm panels, you could place an
Arm/Disarm button on the toolbar.
Some toolbar buttons will only be displayed when the panel is open or when you are connected to a
panel. For example, the Arm/Disarm button will not be displayed and enabled until you are connected
to a panel. Also, toolbar buttons are not displayed if the panel does not support that feature.
Placing Buttons on the Toolbar
To customize your toolbar, open System > Toolbar Configuration. The Toolbar Configuration window
will then open. From the Available Menus box, select the menu option you would like to place on the
toolbar. Then press the Add button.
Using the Arm/Disarm example, click the plus sign next to Command in the Available Menus box.
Then select Arm/Disarm and press the Add button.
Arranging the Toolbar
The Toolbar box displays the menu options you have placed on the toolbar. To arrange the menu
options on the toolbar, use the Move Up and Move Down buttons. You can also use the Separator