Specifications

SOCKS has the following key features:

provides authentication for protocols that cannot be authenticated

by passes default routing in the internal network

SOCKS requirements:

the client program must have a SOCKS client capability

the client operating system must have SOCKS client capability

you must run and maintain a SOCKS server

Version: Select the SOCKS Proxy version from the pull down menu.

Host: Enter the IP address of the SCS-101, SCS-104, iCOM or iCOM-E installed in the SCS-1 or SCS-1R

receiver.

Port: Enter the port through which you will connect to the panel. number 1 to 65535.

Cellular Network

This enables a cellular backup connection for Remote Link.

Direct Cell: Click the check box to enable. Remote Link communicates with the panel through a

cellular connection using a SIM/MEID card.

Note: See Backup Connection Information for additional setup information.