Specifications

© 2015 Digital Monitoring Products
System > Configure > Remote Link > Network Tab
TCP Trap
The options available are used to configure the TCP communication connection to the iCOM or iCOM-E
version 103 or higher installed in the SCS-1 or SCS-1R receiver. This allows network panels with a
dynamic IP address to be trapped for Remote Link upload/download.
TCP Trap Enabled: Check this box to enable TCP Trapping.
Programming App. Address: Enter the IP address of the Remote Link computer used to program
panels. If the Remote Link computer is behind a firewall, enter the IP address of the network router.
This address is sent to the panel iCOM or iCOM-E to use for connection to Remote Link for a remote
upload/download session.
Programming App. Port: This is the port used by the Remote Link computer to make the connection
to the panel, iCOM and iCOM-E using TCP protocol. The default value is 2002.
Trap Server Address: Enter the IP address of the SCS-101, SCS-104, iCOM or iCOM-E installed in the
SCS-1 or SCS-1R receiver. This address is used by Remote Link to send trap messages.