Specifications

© 2015 Digital Monitoring Products
Information: General information detail about program operations.
Warning: An error condition such as minor communication problems, timeouts, etc. that can be
handled without operator intervention. A warning message may or may not be displayed to the
operator.
Exception: An error that requires operator action to recover or restore normal operation such as an
invalid COM Port selection for the receiver.
Critical: An error that caused Remote Link to stop responding such as an Access Violation or database
corruption.
Archive
Pass Through Options
Adm in Reader
Enable Auto Account Archive: Select this option to allow panel
account programming to be automatically archived (saved
separately) when connecting to a panel with programming different
than the programming currently on file. Default is unchecked.
To archive panel account programming manually, select File>Panel
Information.
Max Per Account: Select the maximum number of panel programming archive verisons allowed to be
stored per account. Allowed range is 1 to 20 archives. Default is 5.
System > Configure > Remote Link > Other Tab
Pass Through Options
Mode: When Remote Link is in the Pass Through mode, standard panel reports will be sent to and
acknowledged from a host computer. Select the appropriate setting.
None: Select this option if you are not using Pass Through mode to relay signals to automation
software.
Pass Through: Select this option to pass reports through the Remote Link computer to a host
automation computer.
Outgoing COM Port: Select the COM port that Remote Link will use to communicate with your host
automation computer.
Baud Rate: Set the baud rate to 9600 unless your automation software requires a different setting.