Specifications

volt/amp (VA) rating - the products of rated input voltage multiplied by the rated current. This

establishes the apparent energy available to accomplish work.

Wide Area Network (WAN) - a network that spans distances beyond the range served by LANs. WAN

distances are usually measured in miles instead of feet.

wideband - a system in which multiple channels access a medium (usually coaxial cable) that has a

large bandwidth, greater than that of a voice-grade channel.

wireless - the use of radio transmitters to send alarm device information through the protected

premises to a wireless receiver connected to a DMP Command Processor panel.

zone - a separate circuit or branch of a security system usually for the purpose of isolating and/or

identifying alarms or trouble in a system. Multiple zones are typically assigned to an area so that all of

their protection devices combined provide for the complete protection of the premises.

zone retard - a false alarm reduction feature that allows fire, supervisory, auxiliary one, and auxiliary

two zones to be programmed to delay from one to 250 seconds. If the zone remains shorted for the

entire length of the zone retard delay time an alarm is initiated.

zone reports - the message transmitted to the central station when a zone is in an alarm or a trouble

condition.

zone retard - a zone programming option that allows you to assign a retard delay time during which a

shorted zone does not initiate an alarm. The retard functions only in zone short conditions and the

zone must remain shorted for the full length of the retard delay before the panel recognizes its

condition.

zone retard delay time - a programmable delay time that can be assigned to fire, supervisory,

auxiliary one, and auxiliary two type zones. The zone retard delay can be programmed from one to

250 second increments. See also zone retard.

zoned systems - identifies the zone area or circuit in which an alarm signal originates. Most modern

burglar alarm systems can signal this zone information to the central station alarm company.

The following keys on the keyboard can be used in a window or a full screen when

you are in the Remote Link program.

Press To

F1 Display Context-sensitive Help