Specifications

© 2015 Digital Monitoring Products
Program>Schedules window allows you to enter or make changes to the Schedule information in the
group database file.
To add a new Schedule, click on the New button and enter information in each field. To accept
the added information, click on the Apply button at the bottom of the window.
To delete a Schedule, select the schedule from the list on the left side of the window and click
on the Delete button at the bottom of the window.
Shift: The Shift drop-down menu allows you to program access and arm/disarm schedules. Select
which shift you want to schedule from the drop-down Shift menu.
Area: Enter the area number that you are assigning to the schedule. In order for this feature to be
available, Area Schedules must be selected in System Area Information.
Opening: Enter the opening (disarm) time. Repeat for each day of the week to program.
Closing: Enter the closing (arm) time. Repeat for each day of the week to program. The opening time
must be before the closing time.
Note: When programming area schedules, enter both an opening and a closing time for each
day that you are programming. A message displays if the time entered is invalid. For
example, if there is only an opening time, but no closing time, and vice versa.
If you want a schedule to run over multiple days-that is, you want the system to disarm on one day and
remain disarmed until later that week-you may schedule this when you enter the closing time. In the
closing field, enter the time and day of the week that you want to schedule the closing.