Specifications

Areas 1 to 32 for XR350, XR550 Series, XR500 Series or XR2500F

Areas 1 to 8 for XR150 Series or XR100 Series

Each profile may be assigned door access to specific areas. When profiles 1 to 98 are created, no

areas are assigned by default. By default, profile 99 is assigned authority to all areas.

Note: On XR150/XR350/XR550 Series, XR500 or XR100 Series panels set to All/Perimeter or

Home/Sleep/Away operation, Access Areas should be left at factory default settings.

Output Group: You may assign each profile to an output group number from 1 to 20. See Output

Groups for more information.

Re-Arm Delay: Allows the entry of 0 to 250 minutes to be used to delay automatic rearming when the

user disarms an area outside of schedule. If zero is selected, the rearming occurs based on Late/Arm

Delay programming in the panel Area Information.

Re-Arm Delay is also used to delay a late to close message to the central station when the panel does

not use automatic arming.

If the user has Extend Schedule authority, 2HR 4HR 6HR 8HR displays at disarming. If the user does

not make a choice, the Re-Arm Delay is used to extend the schedule.

Profile Options: Each user profile may be assigned any of the profile options. Select each box for the

options you wish to assign to the profile.

Shifts (1-4): Check the box for each shift where you want to authorize access for this profile.

Anytime: Check this box if you would like this profile to operate without regard to schedules.

Note: You may select multiple shifts for each profile. For example, a profile may be allowed

Shift 1 and Shift 2. You may not select individual shifts if you select Anytime.

Description: To enter a note or description regarding the profile entry you are programming, type the

information in the Description field or press the Description button to open the Edit Rich Text window.

After you type your note, go to File > Save and Exit to save your work and close the Edit Rich Text

window. Your note appears in the field above the Description button.

(Must have Account G ro ups Mo dule to U se)

Program>Schedules

The Schedules window allows you to schedule auto arming and disarming of individual areas.

To program Schedules for a group, the group must first be opened or created. The currently opened

group displays next to Remote Link or System Link in the display above the menu bar. The