Specifications

© 2015 Digital Monitoring Products
The Advanced Reports Setup window allows you to print reports of the alarm message information.
Open the Advanced Reports Setup window by clicking File > Print > Events.
Source: Select the source of the
reports.
Events: Selects the events sent
from an XT30/XT50, CellComSL,
XR150/XR350/XR550 Series,
XR500/XR100 Series, XR200
(version 111 and above),
XR2500F, XR2400F (version 111
and above), and XR2 00-485
(version 205 and above) panels
that has Host Log Reports
enabled.
Panel Event Buffer: Selects the
panel event buffer as the source
of the reports. Connect to the
panel and then select Panel >
Request Events to print the panel
event buffer.
Note: Each time you request
events from a panel, the last
panel event buffer will be
overwritten. If you do not want to lose the information, be sure that you have printed the
buffer before you request events from the panel a second time.
Report Category: Select the report you wish to run from the 10 Report Categories:
Zone Action Door Access Denied
Arming / Disarming Opening / Closing Schedule Changes
Area Late to Close System Monitors
User Code System Events
Door Access GrantedAll Events
Account: Enter the account number for which you are running the report. Select the All box to create
reports for all accounts.
Date: Enter the date range for which you are running the report. Clicking the arrow opens a calendar
as shown in the screen shot. Click the date you wish to print. You can also select the All box to print all
available dates.
Options: The Options group box changes depending on which Report Category is selected.
(Must have Advanced Reporting M odule to Use)
File > Print > Advanced Repo rts > Zone Action
Select Zone Action to generate zone reports.
Zone Action: Select the zone action for which you will generate the report. Select All to generate a