Specifications

XRSUPER6

1912

1912XR

1512

You can also use the Advanced Reporting module with the XR150/XR350/XR550 Series, XR500/XR100

Series, XR200 (version 111 and above), XR2500F, XR2400F (version 111 and above), XR200-485

(version 205 and above), and XT30/XT50 Panels with the Host Log Reports programming option.

You can also generate reports using the signals received from an SCS-105 or SCS-1 or SCS-1R

Receiver. All DMP panels can be used with the Advanced Reporting Module if this method is used.

(Must have Advanced Reporting M odule to Use)

File > Print > Advanced Repo rts

To obtain the data necessary to create advanced reports, establish a direct connection or a network

connection. If you are generating reports from an SCS-105 or SCS-1 or SCS-1R Receiver, use the

current connection method already established in Remote Link.

Note: If you are using the Request Events method to create advanced reports, use your standard

connection method to Request Events. See Obtaining Data for Advanced Reports for more

information.

(Must have Advanced Reporting M odule to Use)

File > Print > Advanced Repo rts

The Advanced Reporting Module creates reports from the panel's activity. You must obtain the data

necessary to create the reports using one of the methods listed below.

You may create advanced reports using the data gathered by requesting the events from the panel.

Refer to Request Events for instructions. After you have properly requested the panel's events, select

Panel Event Buffer for the Source of the Advanced Report.

Some panels may be programming to send Host Log Reports. The panels that can send Host Log

Reports are the XR150/XR350/XR550 Series, XR500/XR100 Series, XR200 (version 111 and above),

XR2500F, XR2400F (version 111 and above), XR200-485 (version 205 and above), and XT30/XT50

Panels. If the panel is programmed to send these reports, you do not need to request events from the

panel before creating an advanced report.

You may use the messages received from an SCS-105 or SCS-1 Receiver. You may also use the

Advanced Reporting Module with another module, such as Alarm Monitoring. When using the two

modules together or with a receiver, you do not need to request events to obtain advanced reports

data. The Advanced Reporting Module will use the same data received to generate reports.

(Must have Advanced Reporting M odule to Use)

File > Print > Advanced Repo rts