Specifications

the alarm messages to learn the type of alarm, the zone the alarm occurred on, and other

important information.

(Must have Com m and Center M odule to Use)

System > Alarm Grid

The System segment is located in the top left-hand corner of the grid. The System segment contains

information about system messages and signals received form accounts with no information on file.

When a system message is received that is not associated with an account, such as receiver

messages, the System segment will turn light yellow. The name field will display the receiver number

followed by the account number of zero (0). For example, the name field will display 1-0.

When a system message is received for an account that is not in the Command Center's database, the

System segment will change to the color of the type of signal received. The Alarm List will display "No

account record" on the second line of the message.

When a system message is received that is associated with an account, the account's segment will

change to light yellow. You must then process the system message as any other alarm message.

(Must have Com m and Center M odule to Use)

System > Alarm Grid

An icon shaped like a clock indicates that a scheduled automatic recall test has not been received from

the account. When the automatic recall test is received, the icon will no longer be displayed.

Note: The clock icon will only display when Auto Recall Frequency field has been filled-in with a

number of days in the Extended Panel Information window.

(Must have Com m and Center M odule to Use)

System > Alarm Grid

An icon shaped like a padlock will appear in an account's segment to indicate that the account is fully

armed. The icon will appear in every account's segment that has been fully armed. When any area is

disarmed, the icon is no longer displayed.

Note: The padlock icon will only display when Track Armed Status is selected. Go to System >

Configuration > Remote Link and select the Modules Tab.

Note: Only the XR200 version 110 and XR200-485 version 204 support this feature. The other

panels will be revised to include this feature soon.