Specifications

© 2015 Digital Monitoring Products
All: Selecting All will check all boxes.
Clear: Selecting Clear will clear all boxes.
Setup: Click on this button to enter the printer setup window to configure your print options.
Preview: Click this button for a print preview on your computer screen. To save this report,
press the button that looks like a floppy disk when in the preview mode. When you wish to print
the report, got to File > Print > Saved Report.
Print: Click this button to print the account reports to an attached printer.
(Must have Com m and Center M odule to Use)
System > Alarm Grid
The sophisticated Command Center Visual Alarm Command and Control Software expands the
capabilities of the Alarm List present in Remote Link by allowing you to receive Opening and Closing
Reports, and other system events such as Door Access events. You can then use the module to print
these reports for clients. The Command Center enables you to visually monitor alarm activity on
subscriber accounts using an SCS-1 or SCS-1R Receiver, SCS-105 Receiver, or an Ethernet host
monitoring network connection.
The Command Center enables you to visually monitor alarm activity on subscriber accounts using an
SCS-1 or SCS-1R Receiver, SCS-105 Receiver, or an Ethernet host monitoring network connection.
The Command Center is composed of two different windows: The Alarm Grid window is a segmented
grid and the Alarm List contains alarm information for each account. The Alarm Grid window organizes
your subscriber accounts by account number in the grid. Each account is assigned one square, or
segment, in the Alarm Grid window. Each account also has its own Alarm List: When you click on the
account's segment in the Alarm Grid window, the Alarm List opens displaying the account's alarm and
account information.
Once in the Alarm List window, acknowledge alarm signals by pressing the F6 key or by clicking on the
Ack button. You may view account information while in the Alarm List window and open hyperlink files.
If more than one unacknowledged alarm signal is pending, the warning tone will continue until you
acknowledge all alarm signals. In addition, the Command Center displays the message
"Unacknowledged Alarms: X" in red text at the bottom of the screen. "X" represents the number of
unacknowledged alarms.
You can open the Alarm Grid window by selecting System > Alarm Grid from the menu. Pressing F3 also
opens the Alarm Grid window.
Refer to the Alarm List topics in this help file to learn more about the Alarm List within the Command
Center.
To obtain optimum results from the Alarm Monitoring Module, it is highly recommended that you
install the software on a computer dedicated solely to the Alarm Monitoring Module and Remote Link.
Contact your dealer or visit http://www.dmp.com for more information about this new product.