Specifications

© 2015 Digital Monitoring Products
Setup: Click on this button to enter the printer setup window to configure your print options.
Preview: Click this button for a print preview on your computer screen. To save this report,
press the button that looks like a floppy disk when in the preview mode. When you wish to print
the report, got to File > Print > Saved Report.
Print: Click this button to print the account reports to an attached printer.
(Must have Alarm Mo nito ring Module to U se)
The sophisticated Alarm Monitoring Module expands the capabilities of the Alarm List present in
Remote Link by allowing you to receive Opening and Closing Reports, and other system events such as
Door Access events. You can then use the module to print these reports for clients.
The Alarm Monitoring Module expands the services you can offer to your clients by providing them an
easy way to receive Opening and Closing Reports. After you print the reports using the Alarm
Monitoring Module, clients will be able to easily review their opening/closing events and door access
events.
To obtain optimum results from the Alarm Monitoring Module, it is highly recommended that you
install the software on a computer dedicated solely to the Alarm Monitoring Module and Remote Link.
Contact your dealer or visit http://www.dmp.com for more information about this product.
(Must have Alarm Mo nito ring Module to U se)
System > Alarm List
The Alarm List allows operators to receive and process signals from subscriber accounts. You may view
the Alarm List at any time by pressing the F3 key, or by opening System > Alarm List.
Note: You must log on to Remote Link before viewing and acknowledging any messages.
With Remote Link, you have the ability to monitor multiple accounts from one Alarm List window. You
can view the Alarm List while other Remote Link windows are open. If an alarm signal is received
while you have other windows open, the Alarm List will automatically come to the front of all other
windows. If you do not have the Alarm List window open and a new message is received, Remote Link
will automatically open the Alarm List and select the new alarm message.
An audible alert tone will sound on your computer's internal speaker when an a message is received in
the Alarm List. This tone will continue to sound until all messages in the Alarm List have been
acknowledged. Acknowledge alarm signals by pressing F6 or the Acknowledge button. Remote Link will
automatically close the Alarm List after all messages have been acknowledged.
If an operator is not logged on when an alarm is received, Remote Link will sound an audible alert tone
and display the message "Unacknowledged Alarms: X" in red text at the bottom of the screen. "X"
represents the number of unacknowledged alarms currently in the Alarm List.
Alarm List Description
Organization of the Alarm messages
General Information