Specifications

© 2015 Digital Monitoring Products
All the User Codes programmed in the panel display for selection. Click on the check box next to the
user code to export or Select All. When selection is complete, click Export.
Note: The description field is not exported.
Delete User Codes
To delete User Codes from the panel file, select the Delete tab.
Click on the check box next to the user code to delete, or Select All. When selection is complete, click
Delete.
Program > U ser Codes
Using an Admin Reader USB from DMP, you can quickly scan a proximity device instead of manually
entering the User Code. Refer to LT-0619 for information about installing the Admin Reader USB.
After properly connecting the Admin Reader USB to a COM port on your computer, go to System >
Configure > Remote Link and select the Other Tab. Refer to Admin Reader for information on
configuring Remote Link for the Admin Reader USB.
To enter a User Code using the Admin Reader USB, select the user for which you would like to enter
the user code. Press the Scan Card button at any time, then present the proximity card to the Admin
Reader USB. The Admin Reader USB will automatically assign the card's code as the user's code. You
can also use the Admin Reader USB when changing a user code.