Specifications

© 2015 Digital Monitoring Products
level, however the code will expire in seven days.
Level: Choose one of two levels from the drop-down menu.
Standard: A Standard authority level is a mid level user. This level allows all options except
Schedules, Time Set, and User Codes.
Master: A Master authority level assigns all options to the user code.
Level: Choose one of four levels from the drop-down menu.
Scheduled: A Scheduled authority level only functions during a valid schedule, except for arming
which can be done anytime. Disarming is allowed outside of a schedule, but an "Unauthorized Entry"
report is sent to the central station.
Limited: A Limited authority level is a low level user with limited authority.
Standard: A Standard authority level is a mid level user. This level allows all options except
Schedules, Time Set, and User Codes.
Master: A Master authority level assigns all options to the user code.
Temporary: Check this box to make this a temporary code. Leave this box empty to assign this as a
permanent code.
Arm Only: Check this box to assign this user Arm Only capability. Leave this box empty to allow
arming and disarming.
Level: Choose level number 1 to 9 from the drop-down menu for pre-assigned authority levels.
Choose Custom from the drop-down menu to customize the functions you want the user to access.
This allows users to have certain capabilities outside of a standard authority level. After choosing
Custom, the user code authority checkboxes become active. Check the options you wish to assign to
the user.
Choose Temporary Custom from the drop-down menu to assign this as a temporary code. Temporary
codes expire in seven days.
Program > U ser Codes
To copy a user and the user code information to another partition or another panel of the same model,
open the panel from which you will copy the user code information. Select Program > User Codes.
Note: Profiles must be the same in both panels and both partitions to accurately copy and
paste user code information.
Pasting User Information into a Different Partition
In the User Codes window, select the user to be copied from the list on the left-hand side. Click the
Copy button. Click the Paste button. This will automatically paste the user into the panel, allowing you
to then change the Partition number.
Pasting User Information into a Different Panel