Specifications

© 2015 Digital Monitoring Products
The User Codes window allows you to enter or make changes to the user code information in the panel
or database file.
To delete a user and that user's code information, select the user from the list on the left side of the
window and click on the Delete button at the bottom of the window.
To add a new user, click on the New button and enter information in each field as described below.
You may copy and paste user code information between panels that have the same panel type. For
example, if Jane Jones will be working regularly at two sites that both have XR200 systems, you could
copy her information instead of re-entering all of the information manually. For information on
copying user codes between panels and partitions, see Copying User Code Information.
To scan a user's proximity card, press the Scan Card button. See Scanning a Proximity Card for more
information.
User Number: Enter the number you are assigning to this user. This is the number that identifies a
user to the system. The User Number can only be as high as the number of users allowed on the panel
type.
User Code: Enter the user code that you want to assign to this user. If you are using the Admin
Reader feature, do not manually enter the User Code. Refer to Scanning Proximity Cards.
Note: When assigning user codes, keep the following in mind:
When using the Admin Reader feature, do not manually enter the User Code. Refer to Scanning
Proximity Cards on page 121.
User Codes cannot begin with a 0 (zero). Three-digit codes cannot begin with 98.
On XT30, XT50, XTL, XTLN, XTLN-WiFi, XRSuper6, XR20, and XR40 panels you can enter 4-digit
User Codes.
On XR200, XR200-485(B) panels you can enter from 3-digit to 5-digit User Codes.
On XR2500F panels beginning with version 107 and XR100/XR500 Series, you can enter 3-digit to
6-digit User Codes. Previous XR2500F and XR500 Series versions support 3-digit to 5-digit User
Codes.
XR150/XR350/XR550 Series panels with versions 100 and 101, you can enter 3-digit to 10-digit
User Codes for credentials.
XR150/XR350/XR550 Series panels with version 102, you can enter 3-digit to 12-digit User
Codes for credentials.
XR150/XR350/XR550 Series panels you can enter 3-digit to 6-digit User Codes for Arming and
Disarming using the keyboard at the keypad.
XR100/XR500 Series and XR150/XR350/XR550 Series panels configured for All/Perimeter,
Home/Sleep/Away or Home/Sleep/Away with Guest operation, only allow a 4-digit User Code.
Random (Not available on XRSuper6): Press the Random button to assign a random number to the
User Code being entered. The randomly assigned User Code displays in the User Code field. The
number of digits assigned to the random User Code is based on the maximum number of digits allowed
by the panel or the system configuration.
User Name: Enter the User Name that you are assigning to the user. You may enter up to 32
characters.
Profile Number: Enter a number, from 1 to 99 that will designate the areas and functions that a user
may access. Profile numbers are programmed in the Programs > Profiles window. Press the button to
the right of the Profile Number field to display a list of profile numbers and names. Up to 4 profiles
can be assigned to each User Code.