Specifications

Program > Schedules

These panels allow the assignment of four independent shifts. Choose 1st Shift, 2nd Shift, 3rd Shift,

or 4th Shift from the drop-down menu.

Partition: Enter 1 through 4 to assign a partition to the shift you are programming. This option does

not appear on the XR500 Series, XR2500F, or XR100 Series panels.

Area: Enter the area number that you are assigning to the schedule. In order for this feature to be

available, Area Schedules must be selected in Partition Info.

Opening: Enter the time that you want to schedule for the opening (disarm) time. Repeat for each day

of the week that you wish to program.

Closing: Enter the time that you want to schedule for the closing (arm) time. Repeat for each day of

the week that you wish to program. The opening time must be before the closing time.

Note: When programming area schedules, you must enter both an opening and a closing time

for each day that you are programming. The panel will disregard a schedule if it sees only an

opening time, but no closing time, and vice versa.

If you want a schedule to run over multiple days-that is, you want the system to disarm on one day and

remain disarmed until later that week-you may schedule this when you enter the closing time. In the

closing field, enter the time and day of the week that you want to schedule the closing.

Example: In the Monday Opening field enter 8:00 AM. In the Monday Closing field enter 5:00 PM FRI.

With this schedule, the system will disarm at 8:00 AM Monday morning and arm Friday at 5:00 PM.

Note: Some panels allow the entry of Holiday schedules. The Holiday fields will display at the bottom of

the Opening and Closing columns if they are available on the panel type. Enter the opening and closing

time for the holiday, then choose the dates you wish to assign for the holiday schedule in Program >

Holiday Dates. Holiday programming supercedes all other schedules.

XR150/XR350/XR550 Series Panels

Your system provides you with the following schedules menus:

Time Schedules: This menu allows you to program up to 99 access, arm/disarm and holiday

schedules. Select New or the schedule you want to program from the list. Enter the times you want to

Open/Begin/Activate and Close/End the Schedule in the boxes on the right. Click Apply when finished

to save the schedule.