Specifications

© 2015 Digital Monitoring Products
XR100/XR500 Series Panels
Shift: The Shift drop-down menu allows you to program access and arm/disarm schedules. Select
which shift you want to schedule from the drop-down Shift menu. Each panel type has a different
method for assigning shift schedules.
Area: Enter the area number that you are assigning to the schedule. In order for this feature to be
available, Area Schedules must be selected in Partition Info or System Area Information.
Opening: Enter the time that you want to schedule for the opening (disarm) time. Repeat for each day
of the week that you wish to program.
Closing: Enter the time that you want to schedule for the closing (arm) time. Repeat for each day of
the week that you wish to program. The opening time must be before the closing time.
Note: When programming area schedules, you must enter both an opening and a closing time
for each day that you are programming. The panel will disregard a schedule if it sees only an
opening time, but no closing time, and vice versa.
If you want a schedule to run over multiple days-that is, you want the system to disarm on one day and
remain disarmed until later that week-you may schedule this when you enter the closing time. In the
closing field, enter the time and day of the week that you want to schedule the closing.
Example: In the Monday Opening field enter 8:00 AM. In the Monday Closing field enter 5:00 PM FRI.
With this schedule, the system will disarm at 8:00 AM Monday morning and arm Friday at 5:00 PM.
Program > Schedules
These panels allow the assignment of two independent shifts with two unique options for assigning
shifts. You may have either Permanent and Temporary schedules or Primary and Secondary schedules
depending if Primary/Secondary Schedules is selected in Partition Information.
Shift: Choose Permanent / Primary to select a Permanent or Primary schedule that will operate until it
is changed. Choose Temporary / Secondary to select a Temporary or Secondary schedule. The
Temporary schedule will expire at the end of the schedule. The Secondary schedule will operate until
changed.
Partition: Enter 1 through 4 to assign a partition to the shift you are programming.
Area: Enter the area number that you are assigning to the schedule. In order for this feature to be
available, Area Schedules must be selected in Partition Info.
Opening: Enter the time that you want to schedule for the opening (disarm) time. Repeat for each day
of the week that you wish to program.
Closing: Enter the time that you want to schedule for the closing (arm) time. Repeat for each day of
the week that you wish to program. The opening time must be before the closing time.
Note: When programming area schedules, you must enter both an opening and a closing time
for each day that you are programming. The panel will disregard a schedule if it sees only an
opening time, but no closing time, and vice versa.
If you want a schedule to run over multiple days-that is, you want the system to disarm on one day and
remain disarmed until later that week-you may schedule this when you enter the closing time. In the
closing field, enter the time and day of the week that you want to schedule the closing.
Example: In the Monday Opening field enter 8:00 AM. In the Monday Closing field enter 5:00 PM FRI.
With this schedule, the system will disarm at 8:00 AM Monday morning and arm Friday at 5:00 PM.